answersLogoWhite

0


Best Answer

4 " vent to prevent hoarfrost and pitch pocket around the pipe filled with bituminous material 4 " vent to prevent hoarfrost and pitch pocket around the pipe filled with bituminous material

User Avatar

Wiki User

15y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

15y ago

What type of roof vent?

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you install plumbing roof vent?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How to install roof vent?

In plumbing the roof vent should be a min of 4" to prevent hoarfrost


How do you clean a plumbing vent on the roof?

You should not have to clean a vent on the roof. unless you are trying to clean the waste line to the fixture below. Then you would send plumbing rods through the vent on the roof.


What is vtr of plumbing?

Vent through roof


Do you ever have to clean out your sewer roof vent pipe?

Yes. The roof vent is usally located on the roof. If the vent is clogged, it can create numerous issues and prevent your plumbing system from working properly.


What is the alternative to a plumbing roof vent?

The alternative to a plumbing roof vent is an AAV. This is an Air Admittance Valve, a simple spring loaded ABS fitting that serves exactly the same function as a roof vent, except that it does not penetrate the roofing. I used 4 of these while re-plumbing my mobile home, three under countertops and one in the wall behind toilet. I'm very happy with their performance and even happier at having less holes in the roof.


How do you unblock the PLUMBING roof vent system?

A roof vent can be blocked by hoar frost and to illimate this phonimia you need to increase the vent terminal to 4" If a vent terminal is blocked by leaves or other soft debris the water jetting is one of the best ways to clear it


How do you install Heat tape on roof vent pipes?

Why would you? If you had increased the vent terminal to 4" this will prevent hoarfrost


How do you fix a plumbing vent pipe?

Plumbing vent pipe is installed through a cathedral ceiling and metal roof surface there is no easy access into the roof cavity. In an attic after cut off the elbow whose female end contained the remains of the ABS pipe, glued on a short extension and new elbow in the attic, and glued a new plumbing vent rooftop riser into the new elbow. For more information visit at: alliedallcityinc.com


Should you close the vent in your house?

WHICH VENT If you're talking plumbing roof vents or soffit or ridge attic air vents; absolutely not!! I can't thing of a single vent that would be opened and closed at will.


What is the of a vent pipe in a plumbing systeam is to?

I don't quite get what you mean. -A vent pipe in a plumbing system is usually 1 1/2 inch ABS pipe and may extend through the roof, or may end in a AAV under a countertop.


How do you find a plumbing vent?

If you are referring to your vent stack it will be on the roof, either 2" is smaller services and 4" is main line out of the house in either PVC or cast iron. If you are referring to your vent stack it will be on the roof, either 2" is smaller services and 4" is main line out of the house in either PVC or cast iron. If you are referring to your vent stack it will be on the roof, either 2" is smaller services and 4" is main line out of the house in either PVC or cast iron.


Does the Ontario plumbing code allow a U loop in a vent line for a basement bathroom to get around a heating duct?

No plumbing code allows a loop in a vent line. They must be pitched just like a drain line as there are many conditions where water can be in a vent line, such as rain through a roof vent and condensation. If the "u" were to fill with water it would no longer function as a vent.