Boot into Mandriva and shrink your XP partition to a reasonable size, then format the remaining space, minus a few GB, with ext4, and the few GB left over, format as 'swap'. You can do all this with gparted (I THINK that's included on the disk by default - if not you can download and install it from their repositories).
Then on installation just install the data onto the ext4 and register the swap partition as well...swap
If you wish to keep Mandriva, and you do not have an empty space available on the hard drive, you will need to shrink Mandriva's partition, using a partition editor like GParted. Windows will only install to the first partition of the drive, though the partition can be moved. So you will need to shrink Mandriva's partition from the end, towards the beginning of the partition, and then move it towards the end of the drive. Move the swap partition as well. You can then create an NTFS partition, or use the Windows installer to do so. After Windows has been installed, boot from a Mandriva LiveCD, and enter the following commands: grub root (hdx,x) setup (hdx) quit For "root (hdx,x)", the first x is for the hard drive number. If you have only one hard drive, this will be 0. For the second x, use whatever partition Mandriva is installed on. If it is the third partition, use "2". If it is the second, use 1. If it is the fourth, use 3, and so on. For "setup (hdx)", use the number of the hard drive you want the MBR (Master Boot Record) written to. If you have only one hard drive, this will be 0.
Yes.
Fat 32
Yes. Actually, there is no need to remove the hard drive. You can format the existing hard drive and install XP on it as well. Note: Yes, you can there is no need to remove the hard drive. You can format the existing hard drive and install XP. and also you can install both opreting system single computer. XP and vista both.
just perform the same install procedure as you normally would, A Few Nights ago I tried to install Mandriva on my C: Drive with no luck, Though the normal process would be to burn the bootable image file onto CD and then go into the Bios and switch the boot option to boot via cdrom and all should go fine. Not sure what went wrong with my install attempt, but got like a screen full of errors and then it booted me the terminal. WalkthelineFAN
You can install Windows 7 from optical drive (CD, DVD), hard drive (a local copy), network or USB device.
Create two partitions in ur hard drive and install Windows '98 on Drive C and install Windows 2000 on Drive D to another partition.
You can't; there's nothing to install it to.
Windows 2000 will automatically use the FAT32 file system
There is no upgrade path from Windows ME to Windows 2000. You would have to reformat the hard drive to remove ME before you install Windows 2000 from scratch.
You do not have to reinstall Windows if you wish to add an additional drive. If you want to be able to boot from that drive, or to replace your current boot drive, you will need to install Windows on it.
Yes by using a usb flash drive.