How do you hook your dish network to a westinghouse 32in flatscreen tv?

Answer 1

The cable going from your receiver to your old TV, just remove it and connect to your new TV. Depending on the type cable you have to your receiver, if a coax you will put your TV on channel 3 or 4 (usually 3), any other type cable you will put the TV on an input setting. Just cycle through your inputs till you find a picture or a DISH Network message.

Answer 2

Depending upon the type receiver you have, 3 options are available for connecting the receiver to your TV.

With the VIP 211, 211k, 222, 612 receivers, you can use a coax, RCA, component or HDMI cable to connect to your TV; HDMI giving you the highest quality picture if you have HD programming. The VIP 222k, 622, 722, 722k, and 922 receivers allow you to use RCA, component or HDMI cable (K series receivers and 922 have a coax port with OTA module installed). All other receivers can use the coax or RCA cables.

Connect the type cable you have from your receiver to your TV. If you are using a coax cable, place your TV on channel 3 or 4. Any other type cable, you place your TV on an Input setting - HDMI for HDMI cable; comp for component cable; or Vid, AV, etc. for RCA cable.