For a quick temporary fix, wire brush leak inside and outside and apply waterproof silicone sealer. (both sides...let dry)
first remove all equip from boat, flip it upside down onto saw horses, check for loose rivits, ,[first purchase some alum brazing rods,] can be found at harbor freight, you will need a steel or copper wire brush, and a MAP gas torch, locate where the leak might be comming from, wire brush the area good, heat the area with torch, when the alum brazing rod starts to melt when [scratched] on the area put a thin layer on it then wire brush it while heating it, then fill in the area.or follow directions on rod usage.
You need to dry dock it and repair it properly.
A skiff is a small boat - so an aluminum skiff is a small boat with an aluminum hull.
The same amount of weight it displaces in water. No more or it will sink. Eureka! Says the credited discoverer of displacement. Doesn't matter what the boat is made of. As long as it doesn't leak.
width of 12 foot aluminum boat
I have a waterline leak at my home from the street to my home....can I get a grant to fix this leak?
What kind of leak and where is it?
You have to determine the source of the leak then decide on how to fix it.
You will have to locate the source of the leak before you can fix it. Re-post with your findings.
try jb weld or some other type of epoxy; your local hardware store clerk can show right to it
You don't fix the leak on the water tower. It is not part of the island quest.
fix the leak
depends where around the tranny the leak is