remove the bolt on the pully or use a pully remover depending on the style of pully and put new one on.
Open the hood and look. If it has a serpentine belt there is a tensioner.
Bent, Broken, or misaligned pulley
To release the 1990 Cavalier serpentine tension, use a socket and a ratchet. Put the socket on the bolt heat in the middle of the pulley wheel, and pull to one side, and the belt will be loosened to be able to be removed.
Your power steering units pulley has worn or broken bearings. This can harm your vehicle, suggest you have it replaced.
The tension on a serpentine belt is automatically set by the Idler Tension Pulley. If you find it is not correctly setting the tension, the the spring may be broken.
check the serpentine belt .also check all the pulley wheels especially the belt tensioner.one of the pulley wheel bearings may be badAnswercheck the serpentine belt .also check all the pulley wheels especially the belt tensioner.one of the pulley wheel bearings may be bad
You can change the serpentine belt by loosening the tensioner pulley. When the tensioner pulley is loose and the serpentine belt will become loose. Put the new serpentine belt on and tighten the tensioner pulley.
Using a 15mm wrench, turn the bolt in the center of the idler pulley clockwise to relieve tension and remove the belt.
Remove serpentine belt. Remove pulley. Install new pulley. Install serpentine belt.
You can remove your serpentine belt by loosening the tensioner pulley. Pushed the tensioner pulley to the right and the serpentine belt can be easily removed.
The Serpentine Belt needs to be tightend with the tensioner pulley (Idler Pulley)
Loosen the tensioner pulley. The serpentine belt will become loose and can be removed. Put the new serpentine belt on and tighten the tensioner pulley.