To find the conductance using ohms law,you take the inverse of the resistance(/R)
how do you use ohms law express conductance in terms of current and voltage?
amp*volts=watts
Using Ohms Law, the answer is 120/0.5 = 240 Ohms.
the entire branch of electricity uses this ohms law in building their circuits..........the voltage and current relations are being brought using this ohms law also many other laws are based upon this law only.
9V by using ohms law
Resistance of the circuit = (voltage across the circuit) divided by (current through the circuit)
ohms law.
The resistance R in ohms (Ω) is equal to the voltage V in volts (V) divided by the current I in amps (A)
G=i/r V=ir So V=i/g G=i/v
Ohms Law is used for the measurement of resistance. You can find the resistance in a series circuit using this equation; amps=volts/resistance or volts=amps x resistance.The Power Law is used to find the wattage in the circuit. You can find the amount of watts using this equation: watts=volts x amps.CommentOhm's Law has nothing whatsoever to do with either resistance or power.The equation, R = E/I, is derived from the definition of the ohm, and not from Ohm's Law.Ohm's Law simply describes a linear relationship between the potential difference across a conductor and the current through it. It does NOT describe the relationship between potential difference, current, and resistance.
Ohms. It can also be calculated using Ohm's Law. V=I/R where V is voltage in Volts, I is current in Amps, and R is resistance in Ohms.
Conductance titration works on the principle of ohm's law. If we are to find the strength of a acid then we take that acid into a beaker and dip the electrode of conductometer into the acid solution. This measures the conductance of acid. Now, we titrate this acid solution against the base of known molarity, the conductance starts decreasing. This is due to the binding of H+ ions of acid with the OH- of Base until a point is reached where conductance is minimum. When we move forward the conductance starts increasing again. This is now due to the free ions of Base present in solution. The conductance produced by an ion is proportional to its concentration (at constant temperature),