Both of there devices are output units. Each one should be connected to your TV into different inputs. Like video 1 and video 2. then use your TV's video selector button to select which you want to watch.
Connect the digital audio output of the DVD to the the HRT-6130. The HDMI inputs on the HRT6130 are only pass-through, so audio needs to be connected on another cable. If you have a HDMI output on the DVD player, use a HDMI cable to connect it to the TV.
You can look at the in and out connectors on the TV and the amplifier. You have choices that depend on the tv and amplifier, basic stereo, surround sound and tos-link. As you know in and out are connected and out and in are connected. Do not connect in and in to each other and do not connect out and out to each other.
You can but this JVC is not surround, nor does it have a digital input. You will have to use the stereo analog outputs on the DVD player to connect to the JVC's mini plug input on the front of the unit.
An optical audio cable is used to transmit digital audio (AC-3) signal from the source to the receiver, such as from a DVD player to a digital audio amplifier/receiver. You can transmit 5.1 dolby digital or DTS surround sound with an optical audio cable, same as digital coaxial audio cable.
A Dolby Digital stream from a DVD player can be sent to a high def receiver by digital optical or coaxial cable.
the best cable would be an optical digital cable
Connect the digital audio output of the DVD to the the HRT-6130. The HDMI inputs on the HRT6130 are only pass-through, so audio needs to be connected on another cable. If you have a HDMI output on the DVD player, use a HDMI cable to connect it to the TV.
You can look at the in and out connectors on the TV and the amplifier. You have choices that depend on the tv and amplifier, basic stereo, surround sound and tos-link. As you know in and out are connected and out and in are connected. Do not connect in and in to each other and do not connect out and out to each other.
you connect the cable in there
If you have a DVD player and just the speakers, no. You will need a system with an amplifier. Some of the Onida systems include this. Connect the digital audio output of the DVD player to the amplifier.
Very very easy. does your DVD Player ( Home theatre ) have a HDMI cable? If it does, you can just buy an HDMi cable and connect it to Hdmi 1 on your tv and the other end to the Dvd Player and the sound a video will be very crisp. Alternatively, you can use an AV cable ( cable with yellow plugs on the end) and connect it to an AV output on your tv and DVD player. If you are using only the tv's sound this will work, but if you are using a amp,etc. you can connect 2 RCA cables to the tv and the amp for the sound.
Yes, you will need an adapter to play movies on your new DVD player. If the player is a Blu-ray you will need an HDMI cable.
Get a double sided A/V cable and connect it to the DVD player's A/V outlet and the other side to the tv's A/V outlet. Then you must get a male double sided coxal caple and connect to the VCR's coxal outlet then do the same for the tv. I hope this helps you. ;)
Yes, all you need are the three basics cable wires, which are red, white, and yellow. You connect them to their designates colors and there you go. A set dvd player that you can watch your movies on.
You can but this JVC is not surround, nor does it have a digital input. You will have to use the stereo analog outputs on the DVD player to connect to the JVC's mini plug input on the front of the unit.
how to connect dvd player to satellite tv?
The TV has video input in the forms of a coaxial (tv antenna/cable) and RGB inputs.