You need an OBD2 reader which plugs into the standard socket fitted to all modern cars. Typically, this will have a USB connection which you plug into the carputer or laptop. You also need software to display the information on screen. Check the OBD2 Link shown for a full explanation of how to go about this.
No, most Chrysler vehicles do not use maf sensors.
The vehicles computer relies on the information from the 02 sensors and other sensors to adjust the engine for peak performance.
an o2 sensor is the same as an oxygen sensor. vehicles can have up to 4
Oxygen sensors are located in the exhaust manifolds & in the exhaust pipes on most vehicles
the o2 sensors
To provide locations of ride vehicles to the plc.
O2 sensors are located on the exhaust system in todays vehicles, they monitor the oxygen levels in the engines exhaust gases. They send that information to the vehicles computer which inturn regulates the engine's fuel system for a clean burn.
Torque sensors are used in vehicles and aircraft. They are used on engines, gearboxes, crankshafts and transmissions to measure the amount of torque being generated.
The oxygen sensors that connect to the exhaust system. There should be two, and they should screw into the side of the exhaust.
The oxygen sensors on all vehicles are uasually located before and after the catalitic converter to monitor your emisions ! Good Luck !
High impedance meters are used on modern vehicles because of the amount of sensors they have in them. The meters are equipped to handle the circuitry of todays vehicles.
The O2 sensors are located between the exhaust manifolds and the cat converter. They screw in to the head pipes. Those are also called upstream O2 sensors and in some vehicles they are also called air/fuel sensors. There are also downstream O2 sensors that are located after the catalytic converter.