TTL, CMOS and ECL, all them are Small Scale Integration technologies used in different contexts.
ECL basic family reaches rises and falls times of a few ns due to use of a small voltage range and a lot of current, involving high power consumptions. High current and high speed induces a lot of electric-noise put layout designers to a complex and long design-process of PCB.
CMOS basic family, otherwise, it is a very low power consumption SSI technology. CMOS uses high voltage digital levels and power, but it is relatively slow. This technology is low power and it has a high level of noise immunity.
TTL basic family was the head of all other digital technologies. It is a sensible current consumer, a medium speed.
advantages for and gate
Briefly, TTL uses more power than more modern families.
An advantage of the inductive method is that it looks at nature to provide information. A disadvantage is that is sometimes goes against human logic.
list three advantages of AOI logic
The logic functions for both families of devices are the same. They differ only in their performance and other characteristics. TTL stands for Transistor-Transistor Logic. Advantages include higher speed, better current handling and relative immunity to static discharge. Disadvantages include more power consumption, output high voltage drops and fixed supply voltages (typically 5 volts). CMOS stands for Complimentary Metal Oxide Semiconductor. Advantages include better voltage output, better input voltage tolerance, variable supply voltages, higher density and much lower power consumption (although this increases with frequency). Disadvantages include sensitivity to static electricity and less current handling capability. Most new product development is in the CMOS family due to its more desirable characteristics. TTL and CMOS families contain many "sub-families" designed with special characteristics for specific applications. For instance, some CMOS families can handle greater current, function at higher speeds or operate at much lower voltages. Texas Instruments has more than 40 families of products under CMOS and TTL.
This is used in order to amplify the different digital sounds that are coming through. A disadvantage may include that it can get confusing with all of the sounds.
advantages- don't have to change the machine in order to adjust it, just change the program. disadvantage- your program could be wrong or screw up.
Advantages are 1: it reduces number of wires. 2:it reduces circuit complexity and cost. 3:it simplifies logic design. 4:we can implement many combinational circuits using MUX. 5:it does not need kmaps and simplification.
The blocks in a logic gate depends on the logic family we use.A logic gate is designed using a specific logic family. The logic families can be DTL, TTL, CMOS etc.The blocks are different for different logic families.The various blocks in various logic families are:Diode logic: diodes and resistorsDTL logic : diodes and resistorsTTL logic : transistors and resistorsNMOS logic: only NMOS FETsPMOS logic: Only PMOS FETsCMOS logic: Both NMOS and PMOS FETsBiCMOS Logic: both transistors and FETs.
Ilv
less dynamic power
CMOS logic families tolerate low temperatures because they are designed to. I suppose the why is not public because those would be trade secrets.