you simply put it through a machine that takes out all the sludge [poo] and then a grinder that leaves it there for a couple of hours to set into clean water. By Jacob Tharme jtharmenrn@nsix.org
There are many ways to "clean" water.
To purify your tap water one can purchase a purifier attachment, that goes on the end of the sink.
One can boil water which rids the water of anything living, bacteria, viruses, etc.
There is also reverse osmosis which water bottling companies tend to use. It's basically forced filtering. Water is put through a pressurized chamber where only water will pass through. Anything else in the water gets filtered out because the pressure acts differently among different substances.
the best way to check if your water is clean is to smell it it should smell like a faint whiff of chlorine or if there are flaky bits on top
the correct answer is...............................................................
The best way to have clean water, is to boil it. Water purifiers are a close second, and although they still clean your water, they are not the best way to have clean water.
No. The only way to be clean is to not take illegal drugs to begin with.
One can test whether their drinking is clean with a water testing kit. They can be purchased from eBay for as little as $10 and will indicate how clean the water is and if any bacteria is present.
drink lots of water ! also drinking a small cup of vinegar !
One way to test if water is pue is if it doesn't conduct electricity at all. Tap water or other water has other substances in it such as ions that can conduct electricity. One other way to test if water is quite pure is if it has less than 10ppm (parts per million) of impurities in it, spring water is around 25-50ppm. This can be tested with some special equipment
Water
No
you get water and look at it under a micro scope
not sure how to test but you can do a number of things to purify it you could use water purification tablets or boil the water to kill bacteria hope this helps
fillter it is the best way
if its clean water o then you just put boric acid in it