0
How do you change the lock on the tailgate of a 1998 Chrysler Town and Country?
Wiki User
∙ 8y ago
To replace lock cylinder in the hatch ,first inside hatch panel must be removed.
After removing the panel you will have access to the lock cylinder. Remove the linkage to
the cylinder and pull the retaining clip from the cylinder and the lock can be removed
from the outside of the latch. This is not a hard job to do , 1 hour max if your slow .
Wiki User
∙ 8y ago
Add your answer:
Earn +20 pts
How do you change the timing belt on 1998 Chrysler town and country?
A 1998 Chrysler Town and Country would have a 3.8L V6. That engine has a timing chain not a belt.A 1998 Chrysler Town and Country would have a 3.8L V6. That engine has a timing chain not a belt.
Where is the cabin air filter on a 1998 Chrysler Town and Country?
A 1998 Chrysler Town and Country does not have a cabin filter.
How do you change the clock on 1998 Chrysler fifth avenue?
There is no such thing as a 1998 Chrysler Fifth Avenue
How do you change the clock time on Chrysler fifth avenue 1998?
There is no such thing as a 1998 Chrysler Fifth Avenue
Where does the Wiper switch on a 1998 Chrysler Town and Country get power?
The wiper switch on a 1998 Chrysler Town and Country gets power from and is an input to the body computer.
What type of brake fluid should be used for a 1998 Chrysler town and country?
A 1998 Chrysler Town and Country uses DOT 3 brake fluid.
Where does the spare tire go on a 1998 Chrysler town and country?
The spare tire on a 1998 Chrysler Town and Country is mounted under the very rear of the van.
How do you remove the evaporator on a 1998 Chrysler town and country?
97 Chrysler town & country evaporator bolts location for removal
How much transmission fluid is used in a 1998 Chrysler town and country?
Filter change, about 5 quarts Dry fill, about 9 quarts.
How do you fix starter on a 1998 Chrysler Town and country?
Replace it.
Will a 1994 3.8 Chrysler Town and Country Transmission work in a 1998 3.8 Chrysler Town and Country?
No, all of the sensor plugs are different.
How do you change the dim headlight bulb on a 1998 Chrysler Town and Country?
You have to remove the headligth assembly. There are 3 nuts on the back, and 1 bolt on top.
