Take it to a professional
I have a 99 grand am and I am tring to replace the brakes on the front of my car but when I go to put the brakes back on the caliper wont line up wheats wrong with this? How do I fix this?
When changing the brakes a diagram can come in handy. A rear brake diagram can be found in the specific car repair manual.
Brakes do get HOT ~400 degrees actually. What is the symptoms your are experiencing, fading, brake smell, vibration?
You Tube "Happywrenching.com". Incredible video on how to change rear drum brakes on a 99-03 Protege. Did the entire brake job myself! :)
you have bleeder valves on all brakes. look for small fittng usually on back side of brakes starting with rear passenger side crack the bleeder valve and have someone slowly pump the brakes wait to see if all air is out tighten when fluid is steady and NO air bubbles. rear pass to rear drive then front pass and then of coursefront drive
I have a Scytek alarm in want to insall on my 99 Yukon without instruction
Bobsleds have brakes. The brake is a jagged metal bar in the back of the bobsled. The brakeman sits in the back and uses the brakes to stop the bobsled after crossing the finish line. Cheers, 99
You need a 7mm Allen key.
Through the rubber plug on the back straight under the axle.
back up a few feet
Answer BAM!On a 99 jimmy, all 4 brakes should be disk. To change disk Brakes you must remove the wheel, and simply unbolt the cliper. On a 99 I believe there are two sets of bolts. One that attached the caliper to a mount, and then the mount to the axel. Justunbolt it and pull the caliper off. Then remove the pads. In order to put the new pads on you must press the caliper in, to make room for the thicker pad ( usually use a C clamp and just screw it in. ) You must remove the brake reservoir cap, and make sure that when u push the fluid back up it does not overflow. Then just put it all back together. Oh the ease of disk brakes. Just be glad they are not drums!
What size is the tool to take the brakes off of a 99 kia sephia