How do you change tail light bulb on a 2004 jeep liberty?

already exists.

Would you like to merge this question into it?

already exists as an alternate of this question.

Would you like to make it the primary and merge this question into it?

exists and is an alternate of .

replacing brakelight for 04 Jeep Liberty By opening the tailgate, you will see two star headed screws. you may need an extension and good lights to get to them. Carefully looses each one with firm pressure using the old standard, (righty tighty, left lucy). Again, be careful not to strip these screws because the can be hard to find.
Next, use a medium sized screwdriver and apply steady pressure between the body and the light case. (MY HUSBAND JUST PULLED THE LIGHT CASE OFF WITHOUT HAVING TO USE A SCREWDRIVER) There are two pins that hold the brake light in place and they need to pulled back carefully so as not to scratch the paint. The brake light is the compartment on the bottom (ACTUALLY IN MY JEEP IT WAS THE TOP CASE) , twist and pull. The unit will come out and then the bulb can be replaced. It should pop into place. Everything else will work in reverse when it comes to assembling the whole unit. (THIS WAS HELPFUL! THANK YOU TO WHOMEVER POSTED IT!!)
18 people found this useful

How do you change the rear stop light bulb on a 2002 Jeep Liberty passenger side?

Just did this last night! Open the rear door. From the inside of the door look through the crack between the door and the inside of the tail light assy. There you will see two

How do you remove a Jeep Liberty tail light to replace a bulb?

Simply use a Torx wrench. I can't remember if it's a size 15 or 20, but it's pretty easy. Look closely for the Torx screws. I believe you have to open the tailgate to see them

How do you change a tail light for Jeep Liberty?

Answer . \n1) You will need to open the rear swing door.\n2) On the inside jam there are two torx headed screws (T-15's if I remember correctly).\n3) Unscrew the two torx

How do you replace a tail light bulb on a Jeep Liberty?

Open up your tailgate and on the sides of the taillights will be screws, you need a Allen wrench or Allen type screwdriver. Unscrew them and pull out the taillight assembly (u

How do you change tail light on 2003 Jeep Liberty?

To access the driver's side tail light, open the tailgate. There are two torque head screws that hold the bulb housing in place. These screws can be removed by reaching a regu

How do you change brake light 2004 Jeep Liberty?

Answer . I own a 202 Liberty. I changed the rear brake light/ tail light myself. To change the passenger side is easy. Open the rear door and locate the two screws that hol

How do you replace the left brake light bulb on a 2004 Jeep Liberty?

Answer . two screws have to be removed with a star driver (T-15). Open the tailgate and remove the screws in good lighting. Next, carefully pry the brake light from the bo

How do you change tail light bulb on a 2004 Chevy cavalier?

Pull back the upholstery in the trunk near the light to see the backside of the taillight assembly. You will see a black piece of plastic with wires running into it. This asse

How to Change tail light bulb in Jeep Patriot?

No model year given so can't get specific. Here is the general Jeep Patriot tail light bulb lamp replacement procedure: Purchase the correct replacement tail light bulb(s) fir

How do you change the drivers side tail light bulb on a 2006 jeep liberty?

2006 Jeep Liberty tail light bulb lamp replacement: Purchase the correct replacement tail light bulb(s) first, before disassembling the vehicle. See sources and related links

How do you change brake light bulb on jeep liberty 2006?

2006 Jeep Liberty brake light bulb lamp replacement procedure: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and re