answersLogoWhite

0


Best Answer

1. Get the right spark plugs fron your local autosho 2. Start at plug 1, which is the 1st plug in from the left of the engine. Gently work spark plug lead off the plug. 3. Set the gap at .54" ( the gap is the opening at the botom of the plug) 4. Insert new plug 5. Reconnect plug lead. If you want to replace the plug leads then do them 1 at a just time follow the lead back to the distributor cap and swap it out. Tools needed Socket set with spark plug socket and extention bars Pliers Spark plug gap tool (champered disc with numbers on it) Difficulty.. low.. number 6 can be tricky but can be done without major trauma Time.. 5 mins per plug

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you change spark plugs 90 Chrysler lebaron v6?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What size socket is needed to change spark plugs on 1987 Chrysler lebaron?

13/16 inch


What brand of spark plugs to use in a 1995 Chrysler lebaron?

Champion


Where are the spark plugs on a 1988 Chrysler lebaron?

They are screwed into the cylinder head, at the end of the plug wires.


What is the gap on spark plugs for a 1991 Chrysler LeBaron?

If it is a 3.0 liter V6 EFI. Then it will be .044


What would cause a 1995 Chrysler LeBaron to not have power to the distributor?

There could be a few things on a 1995 Chrysler LeBaron causing the distributor not to have power. But first I would check the spark plugs and see if maybe they have gone bad.


How can change spark plugs 2002 Chrysler Sebring?

Read the manual.


What kind of spark plugs do you buy for 90 Chrysler lebaron?

The Champions it was built with. Check the bottom corner of the under hood label for the number.


How do you change spark plugs on a 1998 chrysler cirrus?

Changing spark plugs is an important task. To do this, disconnect the battery and spark plug cables, and remove the old spark plugs. Next put in the new spark plugs, and reconnect the spark plug cables and then the battery.


Chrysler c300 srt8 how many spark plugs?

My Chrysler 300 SRT8 with a 5.7 Hemi has 16 spark plugs


How do you change spark plugs on a 2005 Chrysler Sebring?

Disconnect the battery, remove the spark plug cables and boot, and remove the old spark plugs. Put in the new spark plugs, attach the cables and boots, and connect the battery.


How do you change the spark plug wires on a 1995 Chrysler LeBaron?

You remove them one at a time, and install the new one the same way.


When do you change your spark plugs?

when do you change spark plugs