(This answer Covers the Ford Motor Company Ford Taurus and Mercury Sable with the 3.0L OHV "Vulcan" Engine and the 3.0L DOHC "Duratec" engines.)
Installation notes:Replace the belt by fitting it around the pulleys and lastly loosening the tension with the tensioner/idler pulley to allow the belt to fit over the last pulley.Replace the belt by fitting it around the pulleys and lastly loosening the tension with the tensioner/idler pulley to allow the belt to fit over the last pulley.
AnswerPut a wrench on the (spring loaded) tensioner/ider pulley and take out the tension. You can then remove the belt. Replace the belt by fitting it around the pulleys and lastly loosening the tension with the tensioner/idler pulley to allow the belt to fit over the last pulley.routing for serpentine belt 2003 mercury sable
No 2011 Mercury Sable model , but there is a 2011 Ford Taurus
99% sure the Taurus radiator will be a perfect match to the Sable's.
No, a Generation 2 (1992-1995) Taurus/Sable Windshield will NOT fit a Generation 3 (1996-1999) Ford Taurus/Sable.
No they do not
mercury sable
The Mercury Sable and the Ford Taurus will have DOC in printed on the engine if they are dual overhead cam engines. The symbol should be on the top of the engine.
Yes, it is identical.
Yes, it does.
Yes.
Just one handles the job. See "Related Questions" below for more about Taurus/Sable fuel pumps
Yes, I have them on my Taurus, identical body.