answersLogoWhite

0


Best Answer

jack up vehicle and put on stands as u need to get under it!

remove wheel undo the big nut in the centre of hub assembly (middle of disk brake) then u need to undo the 2 bottom shock bolts that hold that hub assembly to the shock but u need to mark the position of the top bolt head as this is your cars camber adjustment.

once the bolts are out u can pull the end of the shaft out of the hub

then u need to slide under the car with a pin punch and hammer and tap the pin out of the inner shaft joint then u can pull shaft off the splines and out of the car...

when putting shaft back in u need to align shaft and splines on gearbox output properly to allow pin to go back in if it wont align properly u need to pull it off and spin the shaft 180 degrees and slide it back on

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do i remove the driveshaft in a 1998 Subaru Forester?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Why is Subaru forester hold light flashing?

why is subaru forester 1998 hold light flashing


Where is the fuel pump on Subaru Forester 1998?

Inside the fuel tank


Does the odometer on a 1998 Subaru Forester have a 100000th place?

The odometer on a 1998 Forester, just as any other modern car, has a million-mile speedometer.


Is there a hatch release on a 1998 Subaru Forester?

Yes, it is the handle on the outside of the hatch.


What is lo on the dash of a 1998 Subaru Forester?

That means that the car is in low gear.


What is the tire pressure for a 1998 Subaru Forester?

What is manfacture tire pressure for a1998 forrester


What is p0325 engine code for a 1998 Subaru Forester?

Knock sensor/vibration sensor


Will check engine light come on with a bad knock sensor on a 1998 Subaru Forester?

Not necessarily.


Where is the PCV valve on 1999 subaru legacy outback?

where is the pvc valve on a 1998 suaru forester?


Where is the ECU on a 1998 Subaru Forester?

ECU is on the passenger's side front floorboard. There are a couple of retaining clips that hold the carpet in place. Remove those and pull the carpet back.


How do you remove 1998 Subaru Forester fuel tank?

Go to your local auto parts store and get the Haynes manual (or similar) for your Forester. Cost about $20. Read and see if you feel that your skills are up to doing the procedure. Otherwise, leave this to a professional. --Ken


Horsepower of Subaru Forester 2.0 s turbo 1998?

The 1998 Subaru 2.0 liter turbo engine has a rated horsepower of 180. The horsepower can be increased by adjusting the fuel pump.