Use a razor blade knife to cut the caulk. It isn't under the toilet, just around the edge.
Rusting bolts normally indicates that the bolts are brittle. Taking a pair of water pump pliers and squeezing really hard will most of the time break the rusted bolt so you can remove the toilet seat. Otherwise depending on the type of toilet seat installed, you can drill a hole right through exactly where the rusted bolts slot in, so helping you remove the toilet seat.
I charge $226 to remove and reset a toilet in the Los Angeles area. This is a standard price, but there are always exceptions for vintage toilets and other non common situations.ANS 2 - Anything over 1 hour labor to remove and reset a toilet is over charging. I do many and make a reasonable profit charging less than $100
1. First loose the bolts that connect it to the flange on the floor and place the toilet in the bathtub 2.Turn off the water supply 3. Remove the lid of the toilet tank and flush the toilet 4. Use a plastic cup & dry sponge to scoop out water and dry up water drop. 5. Disconnect the water supply tube by turning the compression nut on the water supply valve. 6. use a flat head screwdriver to pry the caps from the washers at the base of the toilet. 7. Remove the nuts by using a wrench from the bolts. 8.Place the nuts, washers, and caps properly. 9. Hold the toilet under the bowl and rock it gently back and forth to break the old wax seal. 10. Lift the toilet off of the floor and set it down on a blanket, a piece of cardboard or in the bathtub. For more information visit mytoiletspares.co.uk
Sounds like the washing machine discharge is fitted to the main drain in the wrong place and it's discharge is filling your toilet. It's possible there may be something of a blockage just after the toilet, causing a backup. I would try to snake the the pipe from toilet out. You may even have to remove the toilet from the floor and do it there if there is no access underneath (like a basement or a crawlspace). I have snaked main drains from the toilets many times, and it's a pain having to re-re the toilet, but often it's the only way.
Replacing a toilet flush handle is inexpensive and is generally a one person job. The handle can be replaced by opening the tank and unhooking the chain. Using a wrench you can now remove the handle. To replace the handle simply attach the chain and secure in place.
I have caulked the doorway, now I am starting on the windows.
The wax ring which seals the toilet to the drain is leaking. turn off water, drain tank by flushing. Disconnect water line. remove tank, unbolt toilet from floor. Remove any old wax from toilet and drain. Replace with new wax ring. Reset toilet and press firmly into place.
Pull it out.
toilet cleaner, or Windex if it is the outside of the toilet bowl.
Remove the bowl turn it up side down and remove theauger head
Broken toilet flange. Toilet flange bolts may be loose.
The knobs on the bottom of the toilet hold the toilet to the bolts that in turn hold the toilet in place on the floor.
Remove the toilet from the floor, locate the broken tip, and replace the toilet. Don't forget the new wax ring.
Suction
form_title= Toilet Seat form_header= Sit comfortably with a new toilet seat. What color do you want the toilet seat?*= _ [50] Do you want the toilet seat cushioned?*= () Yes () No Do you need to remove an old toilet seat?*= () Yes () No
In the toilet.
Comet or any other toilet bowl cleanser and a scouring sponge.