0
The copper should fit in the Pex fitting. My mistake, Pex uses the crimp rings. There is a coupling and other fitting that you just push the pipe into and it grabs and seal the pipe. Pex, pvc, copper, all will fit. Just use a coupling between the copper and the pex. I had my doubts the first time I used this, but it does work and doesn't leak. Just make sure that the pipe bottoms out in the connection.
Wiki User
∙ 13y ago
Wiki User
∙ 12y agoBy calling a professional with the proper tools. There are several systems of PEX pipe connections. All require specialized tools to make those connections. The simple answer is a copper by PEX adaptor which every system of pex pipe has to make such transitions.
Wiki User
∙ 11y agoIf using PEX for an addition or a repair, you can join it easily to existing copper piping by compression unions or Sharkbite unions. Sharkbite is easier, but about 2x the price of compression fittings. Once started with PEX it's very easy. You use special brass fittings and simply crimp them to the tube. The traditional crimp tool costs about $150, but there is a cheaper, faster method using Surelok tool and SS crimps.
Add your answer:
Earn +20 pts
Does pex tubing freeze?
At what temp does pex pipe freeze
What is CTS OD?
Copper Tubing Size, Outside Diameter controlled. - How copper and PEX tubing size is specified based on the outside diameter. Common sizes are 3/8, 1/2, and 3/4 inch. This contrasts to pipe sizing which is based on the inside diameter.
Can you you plastic pipe instead copper for pluming in shower?
Yes, plastic pipe, PEX, can replace copper anywhere now.
PEX Tubing ?
form_title= PEX Tubing form_header= Become a home improvement master with PEX tubing. How much tubing do you need?*= _ [50] What size tubing do you need?*= _ [50] What color tubing do you need?*= _ [50] How will the tubing be used?*= _ [50]
Why change galvanized to copper pipe?
Lots or reasons really. Copper does not rust, and its easier to repair if the pipe does happen to fail. Pex may be a more viable option if this is a DIY project due to cost of copper and skill required to solder connections. Depends on the applications such as waste, vent ,water supply. Copper Pipe is no longer used because of cost so many settle for copper tubing or Red Brass pipe 85% copper 15% zinc
What are facts about copper tubing?
It's old fashioned, prone to pin hole leaks, hard to join and repair in walls and expensive compared to modern pipe like PEX . Traditional plumbers copper because it's very labour intensive.
Why is pex tubing color coded?
Pex tubing was manufactured for plumbing. The actual tubing comes in two colors, red, and blue. These are to signal hot and cold when you are running the tubing.
Can pex pipe be used for propane?
No, it is made for water only. Black iron pipe or copper are only allowed and a special plastic coated copper for underground installations.
Which materials will keep water hot?
PEX pipe will keep it hot longer than copper.
What is the advantage of pex pipe?
The two main advantages is that its cheaper than copper and is easier to install.
How does PEX supply tubing get connect to city water meter?
for a 3/4" supply use a 3/4" PEX x 3/4" NPT Brass F Adapter
What caused a banging noise in your in floor radiant heating system?
There are several things that can cause noise in a radiant floor heating system. If the system has plastic tubing, like PEX, and the tubing is not embedded in concrete but rather stapled under the floor, the tubing may be expanding and causing popping under the floor. All things expand when heated and PEX really expands. Isolating the tubing from the building materials will reduce the chances of noise in the heating system. If the feeder pipe to any manifolds is constructed of copper then this may also be the source of the noise in the system. Copper must be isolated from the building materials as it expands too.
