"Place the key in the ignition and start the vehicle. Like other vehicles, the Saab has an alarm box under the driver-side dash board. Press and hold in the override button until the alarm chirps one time.
Lift and secure the hood of the vehicle so it doesn't fall on you, then look for the fuse box. On Saab vehicles, the fuse box sits to the right of the engine, next to the firewall.
Locate the correct fuse. Most fuse boxes have the fuses labeled clearly. If the fuses aren't labeled, look at the diagram on the back of the fuse box cover to determine which fuse connects to the alarm.
Pull the fuse. Use a fuse puller tool to remove the fuse from the fuse box carefully. Put the cover back on the fuse box, and close the hood of the car."
Per it still runs .com
http://en.allexperts.com/q/Car-Alarms-1513/1997-Honda-Accord-Alarm.htm
You disarm the factory alarm by unlocking a door with the key or use the remote.
i need a control alarm
how to disarm the factory alarm on a 2000 lincoln navigator
You can disarm your 1997 Mitsubishi Eclipse factory alarm system by removing the alarm fuse. The location of the alarm fuse can be found on the inside cover of the fuse box.
Disable, no.
The factory alarm can not be disabled. It can only be repaired if malfunctioning.
The factory alarm can not be disabled, only repaired if malfunctioning.
The factory alarm is reset by unlocking the doors with a key or the remote.The factory alarm is reset by unlocking the doors with a key or the remote.
The factory alarm is disarmed by unlocking the doors with a key or remote.
The factory alarm is reset by unlocking the doors with a key or remote.
The factory alarm is part of the engine and body computers and can not be bypassed. If malfunctioning, the fault must be repaired.