You need to be very careful!!! Make sure you don't damage anything... And most of all make sure that you wear eye protection.
Step 1: Remove all bolts on the oil pan.
Step 2. Remove Oil Pan from engine.
Step 3. Clean all part and also don't forget to clean mating surface on the engine side as well.
Step 4. apply rtv sealant on Oil Pan, then carefully place gasket onto oil pan.
next - remount oil pan to engine side
next - hold oil pan in place and replace all screws and tighten to correct specs.
Well done -- That its.!!!
.043 is the correct gaping for the plugs in a 1993 Toyota tercel. This is taken rite from the Hayes repair manual
in the engine
1.5L
For the 1993 Toyota Tercel, the O2 sensor has three different wire colors. These colors are: black, blue, and white.
ok
25'
where do you find the filling plug for the gear oil on a 1993 Toyota tercel
it should they r the same
It deploys at about 25mph
diagnostics ....
maybe
Mounted on top and inside the fuel tank.