How do I change a phone number stored in my Canon laser class 3170?
After searching for two days I have finally found the user manual for the Canon Laser Class 3170. http://www.procopyoffice.com/Manuals/LC3170/LASER%20CLASS%203170%20Series%20Users%20Guide.pdf
6 people found this useful
To Set the Time and Date:. 1. To open the USER SETTINGS MENU. Open all three of the One-touch speed dialing panels. Then press the button labeled "Data Registration".. 2. Pr…ess the "SET" button 2 times until you see:. USER SETTINGS - 1. DATE & TIME.. 3. To open the DATE & TIME Menu. Press SET.. Use the buttons on the numeric keypad to enter the current month, day, year and current time. Just enter the new numbers over the old numbers.. To set the year, enter 08, 09, etc.. Use the 24-hours format to enter the time (e.g. 1:00 p.m. would be entered as 13:00). You can also use the cursor buttons to move the cursor without changing a number entry.. To restore previous entry, press CLEAR.. Press SET to "lock in" the Date and Time.. These instructions come directly from the User's Manual. I hope this helps you.
I had the same problem and contacted canon. they said to take the printer to a service centre( how obsurd is it?) so they can make some money out of it.. don't be fooled, DO …NOT BUY CANON PRODUCTS AT ALL.
Found this answer on this site, don't know if it was pre- or post- this question. http://www.procopyoffice.com/Manuals/LC3170/LASER%20CLASS%203170%20Series%20Users%20Guide.pdf… answer resources on canon laser manual are available in the internet. .
The first step in setting up a Canon 3170 is to connect it to the computer and install device drivers. After that, ink cartridges should be installed in order to perform the p…rint test.
To set up speed dial numbers on the 3170 series (there is nospecific manual for a Canon 3175), chapter 4 of the user manual inthe related links section - there is too much the…re to put intothis answer section.
Try the Joyfax Server plz. it allows you to send a fax to up to 2000 people in a time
if you're looking to change the header information that appears on a fax, you'll need to set those options in either the TSID or CSID area of the fax. This information is what… appears on the header.
Fax machine will beep. You have to set it. Mobile phone confirmation is available when you subscribe internet fax service provider. It will send alert message in mobile phone …when you received and sent faxes successfully.
i need the 3170 to stop printing an activity report every day. Howdo i accomplish this, it is wasting paper.
Press (Menu) . . Press , and then press [OK]. . Press , and then press [OK]. . Press desired to set , and then press [OK]. . "Specify the date display format". . …"Specify the time display format". . "Specify the current time and date". . "Specify whether to use daylight saving time ". . Press (Menu) to close the Menu screen.
Open all three one-touch dialing panels. Press [DATA REGISTRATION].Press [Down] arrow until appears, thenpress [Set]. Press [Set] again for Date / Time Setting. Use numericke…ypad to enter info.
To Set the Time and Date: 1. To open the USER SETTINGS MENU. Open all three of the One-touch speed dialing panels. Then press the button labeled " http://wiki.answers.com/…Q/How_do_you_set_time_on_Canon_Laser_Class_3170_FAX## Registration". 2. Press the "SET" button 2 times until you see: USER SETTINGS - 1. DATE & TIME. 3. To open the DATE & TIME Menu. Press SET. Use the buttons on the numeric keypad to enter the current month, day, year and current time. Just enter the new numbers over the old numbers. To set the year, enter 08, 09, etc. Use the 24-hours format to enter the time (e.g. 1:00 p.m. would be entered as 13:00) You can also use the cursor buttons to move the cursor without changing a number entry. To restore previous entry, press CLEAR. Press SET to "lock in" the Date and Time.
The user manual lists sequential broadcasting under section 6-22 -see related links section for a copy of the user manual.
1. Open the Speed Dial Panel 2. Press Data Registration 3. Press Set 4. Press Set (a second time) 5. Press Set (a third time) 6. Use the numeric buttons to type in the correct… date and time 7. Press set to save the date and time 8. Press stop to return to standby mode
It does not appear that this feature is available - as quoted fromthe manual in section 3-12, "According to recent amendments to the FCC rules governmeningtheuse of fascimile… equipment in the United States, the followingsender information must be printed on every fascimile transmission: - Your fax number - Your personal name or company name - Time and date of transmission User manual has been added to the "related links" section of thisanswer.