answersLogoWhite

0


Best Answer

If you can't turn the blade the motor is probably seized. Return the mower if it is new it will have a warranty.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How come your lawmower will not let you pull the rip cord and start it The blade seems to be stuck as well Can somebody help you you are 75 yrs old and have new lawnmower and can't use Frustrating?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How does a mulch blade work on a riding lawnmower?

A mulch blade works well on a riding lawnmower.


Can you sharpen a lawnmower blade?

Yes.


What is a lawnmower blade?

if you have to ask what is a mower blade would suggest you hire some one to do your lawn work


Which is better to replace my lawn mower blade or sharpen it?

The best thing to do on an ineffective lawnmower blade is to replace it.


Why is the lawnmower shaking?

A shaking lawnmower is usually a bent / broken blade. Don't continue to run the engine, because you can bend the crankshaft. Check the blade first, and if the mower continues to shake even with a balanced blade, then the crank shaft may already be bent.


What do these items have in common razor lawn mower rollerblade?

A Razor, a lawn mower, and a rollerblade all include a blade. A razor has a blade. A lawnmower has a blade A rollerblade has no actual blade but it has the word blade in its name.


Does sharpened side of lawnmower blade go up or down?

The orientation of a lawnmower blade depends on the specific design of the mower and the blade itself. In general, lawnmower blades are installed with the sharpened edge facing down toward the ground. The cutting edge should face the grass to ensure an effective and clean cut. Here are some key points to consider: Sharpened Edge Faces Down: In most cases, the sharpened edge of the lawnmower blade should face down. This means that the cutting edge is oriented toward the ground, allowing it to make contact with the grass and provide a precise and efficient cut. Check Manufacturer's Instructions: Always refer to the manufacturer's instructions or owner's manual for your specific lawnmower model. The manufacturer's recommendations may vary based on the mower design and blade type. Blade Replacement: If you're replacing the lawnmower blade, make sure to install the new blade in the same orientation as the old one. This helps maintain the proper cutting performance of the mower. Balancing: Some lawnmower blades are designed with a specific top and bottom. If your blade has a designated top side, make sure it is installed correctly for proper balance. Inspect the Cutting Edge: Before installation, inspect the cutting edge of the blade. The side that has the sharper, beveled edge is the side that should face down. Safety Precautions: When removing or installing a lawnmower blade, be sure to take appropriate safety precautions. Disconnect the spark plug or power source to prevent accidental starts, and use gloves to protect your hands. Always refer to the guidelines provided by the mower manufacturer to ensure that you install the lawnmower blade correctly. If you're uncertain or have specific questions about your lawnmower, consult the owner's manual or contact the manufacturer for clarification.


Is a lawnmower blade a flywheel?

If it has a pull string then it has a fly wheel. But the blade itself is not the fly wheel. The fly wheel is inside the upper chassi where the motor is.


What simple machines are in a lawnmower?

The wheel and axle is what turns the blade which has inclined planes on it which slice through the grass. the wheel and Axle also allow for the lawnmower to be moved easily. Depending on the lawnmower, screws most likely hold it together.


What noun is used with a blade of?

The most common nouns that may be used with 'a blade of' may be a 'blade of grass' or a 'blade of steel'. There are other terms for a blade, for example the blade of a knife, the blade of a razor, or the blade of a lawnmower, etc.However, the noun 'blade' can also be used in an abstract context, for example:He wields the blade of power while I wield the blade of labor.


Where to get parts for a Dayton Riding Lawnmower?

snow blade for a dayton 16/44 riding lawn mower


Where is the oil drain on a craftsmen self propelled lawnmower?

under the mower above the blade should be a allenhead plug