dnt no you can separate glycerin to add brine solution at the time of soap trace brine solution is a salt water and salt is insoluble in glycerin so after pouring salt water the soap separated in two phases soap upper phase and the spent soap lye(lower phase)the spent lye soap was filter to remove unwanted soap particles after hydrochloric acid treatment and then neutralizing with sodium hydroxide solution and then keep in oven for drying this stage there will be two layers salt and glycerin layer care fully decanted and store in a refrigerator
by puting them sea prat cupes
add salt
Glycerin is another name for glycerol, which is a pure compound, not a mixture. However, if you leave pure glycerol exposed to the air, it will attract moisture, so an opened bottle labeled "glycerin" may in fact contain a mixture of glycerol and water (up to about 20% water).
Distillation.
Distillation.
Water.
you can use an instrument called separating funnel to separate this mixture.
Glycerin is another name for glycerol, which is a pure compound, not a mixture. However, if you leave pure glycerol exposed to the air, it will attract moisture, so an opened bottle labeled "glycerin" may in fact contain a mixture of glycerol and water (up to about 20% water).
The reaction of glycerol and water leads to the glycerol competing with the hydrogen bonds of water molecules. This disrupts the formation of ice crystals, depressing the freezing point of water.
Boiling off the water from a salt solution will separate the solid salt and water (which can be collected by a condenser).
Distillation.
Yes as The amount of emulsifier in the mixture of water and oil is increased the time taken for the oil and water to separate is increased.
For example a mixture of water and an insoluble solid.
You can filter it or evaporate and condense the water
boling it
with fillter paper
evaporation
boling it
centrifuging.