1. Best way is in the form a an integral concrete color. This is usually in the form of bags added at the concrete plant. Usually cheaper if the concrete supplier will allow you to buy the bags yourself and add them on-site.
2. Second choice is a stain. These are easier, can be put on after the concrete is poured and less expensive but will wear off in time especially on driveways, garages, etc. Best left to interior stuff.
AnswerIf you want to add color to an existing floor:Add an oxidizing agentPaint it. You should use a floor paint. Priming it would be of value. Make sure to sweep and mop first.If you are looking at having a new, colored, floor poured:The most common way to color concrete is by adding a tint color to the base mix. There are a limited offerings at local home improvement stores. Also there are companies that supply the colorant.Any good concrete contractor that might be doing the pouring/ work for you, should have knowledge of colorant additives.There are several colors available for concrete that can be integrally mixed in or surface applied while the concrete is still plastic or unhardened. Scoville and Hoover are just two suppliers. I would consult someone at a concrete materials supply house such as McCann. On the web you can start with a search for concrete colorants and Stamped concrete.
Check with your local hardware store or Home Depot/Lowes etc. There is a special chemical that is supposed to clean everything from concrete.
We suggest painting the surface of cured concrete with either an appropriate stain or paint available at your local "do it yourself" type hardware store (such as home depot or lowe's). You can even purchase a rolled stencil to place over the surface of the concrete and will result in a finished appearance of flagstone or pavers!
How to get rid of concrete floresence
Concrete is a mixture
can a concrete hardner be used after dying concrete without affecting the color
Staining concrete is a great way to get a uniform consistent color throughout the project. Relatively cheap, it is a better alternative to painting your concrete.
Removing color release powder from stamped concrete can be a very labor intensive process. It will involve using chemical stripper to take the sealant off the concrete. Then, using a bristle brush and a diluted acid, scrub the concrete as much as possible to remove the color release powder.
I think brown or grey. I am unsure too!
Asphalt is a dark material that absorbs and retains heat better than concrete, which is lighter in color and reflects more heat. This difference in thermal properties causes asphalt to feel warmer to the touch than concrete when exposed to sunlight.
Tires are made with rubber. Asphalt roads are made with petroleum products. Both are naturally black in color. Of course, concrete roads are normally beige, the natural color of concrete. And I've seen local roads paved with a concrete/stone mix made using red shale, and they have a strong pinkish hue!
AnswerIf you want to add color to an existing floor:Add an oxidizing agentPaint it. You should use a floor paint. Priming it would be of value. Make sure to sweep and mop first.If you are looking at having a new, colored, floor poured:The most common way to color concrete is by adding a tint color to the base mix. There are a limited offerings at local home improvement stores. Also there are companies that supply the colorant.Any good concrete contractor that might be doing the pouring/ work for you, should have knowledge of colorant additives.There are several colors available for concrete that can be integrally mixed in or surface applied while the concrete is still plastic or unhardened. Scoville and Hoover are just two suppliers. I would consult someone at a concrete materials supply house such as McCann. On the web you can start with a search for concrete colorants and Stamped concrete.
The noun stripe is a concrete noun, a word for a line of one color on a background of a different color; a band of cloth on a uniform showing the rank of the person wearing it; a word for a physical thing, a thing that can be seen.
There is no concrete information available regarding Laura Ingalls Wilder's favorite color.
try a concrete stain to blend the whitened area to whatever color it was before
There does not appear to be anything that can be put in your pool to redeye your concrete in the pool dark blue. This can only be achieved by draining the pool and painting the concrete a dark blue color.
It is standard concrete color gray with white support cables and Sea Turtle friendly lights.