if the head is stripped but a rubber band over it and then try again. if that fails use a pair of locking pliers to grab the heat and turn it
Hold your screwdriver firmly on it and hit the end with a metal hammer, this often jars the screw loose.
Wide handle
The function of a screwdriver is to turn a screw into or out of materials.
The function of a screwdriver is to turn a screw into or out of materials.
To install a screw, you use a screwdriver to turn the screw until the head meets the surface that you are screwing the screw into.
NO, a screwdriver is what turns the screw.
Usually with the tire iron/wheel wrench included with the jack. If that is missing, try a ratchet with a socket that fits. I've even used a screwdriver to twist it half-turn by half-turn.
To screw screws'!
It can be used to tighten or loosen the screw as well. Flat head screwdriver is hard to turn the screw with quarter inch wide head. The thickness of the slot of the screw and the thickness of the screwdriver should match. The perfect match of thickness enables you tighten it tightly.
screwdriver
The threads of the screw as the threads are turned by the screwdriver .
Both force and distance increase. You have to use force to turn the screw from point A to point B.
The 'screw' part, as in 'screw-driver'