answersLogoWhite

0


Best Answer

no

User Avatar

Wiki User

15y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Does keeping the water valves connected to you washing machine on run up your water bill?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Is it OK to replace hotcold valves for laundry washer with Comp Boiler Drain valves?

YUP Just make sure there is an air gap in the washing machine


Do you need to switch the main water supply off before you remove a old washing machine?

As long as there are working valves to shut off the hose at the washing machine connection, you do not need to shut off the main. If there are no valves there or they do not work, you must shut off the main before starting and then take advantage of this time to install shutoff valves as well.


On a washing machine outlet box with valves how can you tell if the existing valves can be unscrewed for replacement or whether they were soldered on and would have to be replaced by a plumber?

if the valves have a place for a wrench to fit, usually they were threaded in. some plumbers still solder threaded valves & you can easily see the solder around the threads. If the outlet box is plastic, chances are they are threaded in.


Where are solenoids used?

Solenoids are used in Car Starters, Rail road as electric switch. They are also used as valves to control the flow of fluid in appliance like washing machine.


What are the chambers connected by?

Veins, arteries or valves


Which heart vales are chorde tendineae connected?

The chordae tendinae are connected to the atrioventricular valves. These are the valves that separate the atrium from the ventricle on each side of the heart.


What opens the valves?

the valves are connected with the cams on the engine , the cams are rotated during the power stroke .


What is connected to the chordae tendineae?

The papillary muscles and cusps of the heart valves.


Why are the A-v valves in the heart connected to the muscles and tendons?

The valves are anchored by the tendons. That way when the blood flows through them, they don't move.


What controls the opening and closing of the valves in an engine?

push rods connected to the camshaft


How are automotive engine inlet and exhaust valves refaced and reconditioned?

A machine shop that rebuilds engines has equipment to regrind the valves and valve seats.


How are the four chambers connected together?

The atria and the ventricles are connected through the AV valves. The left and right sides of the heart are separated by the septum.