By definition, the terms 'leading' and 'lagging' refer to what the load current is doing with respect to the supply voltage. So, for a 'lagging power factor', it is the current that is lagging.
Lead. Definitely, without a doubt.
Same
0.5 lead PF or Power Factor means that the signal is ahead of the input voltage by a factor of 90 degrees. The lagging PF means it falls behind the input signal. In sinusoidal signals 0.5 lead or lag will be the same.
lead
Power factor is determined by the nature (resistive, inductive, capacitive) of a load, not whether it is a low load or a high load.
When a generator is connected to a load it is never going to be perfectly matched because of its inductance, when you have inductance the current starts to lag.
Same
power factor depends on the load being fed if the load is entirely resistive power factor will be unity ..if the load includes an inductor or capacitpr due to phase displacement between v and i the pf will be lag or lead respectievly
0.5 lead PF or Power Factor means that the signal is ahead of the input voltage by a factor of 90 degrees. The lagging PF means it falls behind the input signal. In sinusoidal signals 0.5 lead or lag will be the same.
When there is an inductive element in the circuit, the current lags behind the voltage. an ideal inductor will make the current lag behind the voltage by 90 degrees..a capacitive element on the other hand will make the current lead the voltage (ideally by 90deg). That's why capacitors in parallel with the system are used a lot for power factor correction
It would be unity, or 1.0. Since the voltage in a DC circuit does not vary with time, there can be no phase displacement of the current waveform, and therefore the current could not lead or lag the voltage waveform.
A lead or lag applies to a signal due to active components to make it lead or lag the original signal
lead
When looking at power factor, it is the ratio of watts (true power) to VA. The power factor is how we measure power systems. A person with a low power factor like .26 will have a higher electricity bill.
Power Factor is the relationship between the phase of the current and voltage which are each sine waves. When there is an inductance in a circuit the AC current waveform tends to lag the voltage. This causes a phase difference which reduces the Power Factor from a maximum of one to something less.
A lead indicator of revenue, a lag indicator of R&D expenditure.
Current can lag or lead voltage in an AC circuit when the load is what we call reactive. The idea that current is purely a function of voltage only applies when working with DC, or when working with purely resistive loads, such as light bulbs and toasters. Not so, when dealing with motors and power supplies. What happens is that an inductor resists a change in current. That means that, given a particular voltage and current at a particular instant of time, if you change the voltage, the current will not immediately follow - it will lag - because the inductor is a stored energy device. Similarly, a capacitor resists a change in voltage, which means that if you change the current, the voltage will not immediately follow - it will lag - also because the capacitor is a stored energy device. Flip over current and voltage in the analysis of a capacitor, and you find that the current will lead the voltage, as opposed to the inductor's current lagging the voltage. This causes the phenomenon of power factor, which is basically the cosine of the phase angle between voltage and current. Power factor is the ratio of apparent power to true power.
Such indicators are found within scorecards where lead are short-term which affect lag long-term Example: training is lead indicator and service excellence resulted from good training is a lag indicator Best of luck