Just put a little PB Blaster on it. And sewing machine oil. Also make sure you properly lube all of the moving parts in the top. This can make a huge difference.
Automatic transmission fluid.
Dexron auto trans fluid.
Dexron 2 has been replaced by Dexron 3. If your Lebaron requires Dexron 2 then you can use Dexron 3. Never ever use a different type fluid than the manufacture requires, except is a case where the fluid has been discontinued and upgraded.
Loosen the screws of the lower grill and headlamp assembly so that it can be removed from the fenders. Remove the upper grill fasteners and remove the grill. Take off the headlight housing. Remove the headlamp motor and housing. Take out the headlight. Now the fender can be unbolted and removed.
Unhook the hydraulic lines use something to catch the fluid from the ends of the lines. Then push the top down slowly do not rehook the lines or it will not work. The motor can be romoved if you want to. The motor is behind the back seat under the well cover. The top will be manual after following the steps above. Hope this helps you.
The first step on how to change the motor on a 1992 Chrysler LeBaron V6 3.0l is to position the vehicle to where you can get the hoist in and out.
No. They are not interchangeable.
10-30
under black plastic cover above wiper fluid tank.remove cover expose motor.
i need to learn how to take out my 1995 Chrysler lebaron convertible motor
The wiper motor on a 1992 Chrysler LeBaron won't work if the motor has seized up or the fuse has blown. The switch inside the cabin or the wiring can also come loose and cause this problem.
behing the rear seat