To use an HDMI cable for your receiver, you need a VIP receiver.. Each of these receivers have an HDMI port you can use to connect to your TV. You also need HD programming to take full advantage of the HD receiver and HDMI cable.
Yes, you can use an HDMI cable to connect your dish network receiver box to your DVD recorder or the normal AV cables. However, HDMI is perfectly advisable to use.
You can plug into a cable set box a micro usb coiled cable plus a micro HDMI to an HDMI cable. In order to plug these components together successfully, you will need the proper adapters for conversion.
Yes, as long as you have a HDMI connection on your cable box - just connect it to the TV HDMI input.
Depends which connections you would like to do. In most cases you are unable to use multiple component or HDMI connections at the same time. In this case, your only option would be to use a satellite splitter & satellite cable that looks similar to coax (cable that the cable providers use).
You don't. You either connect the PS3 to your HDTV with HDMI and the Comcast box to your HDTV with HDMI cables like I used to have or you connect the PS3 and Comcast Box with HDMI cables like I did to my home theater and then connect the home theater to the HDTV with a HDMI cable. My Comcast box is HD and I have a Sony HDTV and Sony Home Theater equipped with a HDMI repeater. If you are talking about connection for the internet it is not done with a HDMI cable, but an ethernet cable
If it is HD, yes.
It's probably the cable box it either needs some trouble shooting or changed
You'll need a receiver with at least 2 HDMI inputs and 1 output, as well as an HD-capable cable box. Connect the XBOX and the cable box to the receiver with the HDMI cables, and then plug the HDMI output on the receiver to the TV.
The cable comes out of the wall to the HD converter box and the converter box connects with the HDMI or video cable to the same on the tv set. If the tv has HDMI connector use it. HDMI will give you much better picture than video cable connections.
An HDMI cable connects from the Bell cable box to the surround receiver and then to the TV.
You can't. You will have to use a HD cable box with an HDMI output to connect this receiver.
on the xbox 360 its at the back of the xbox 360. there is a hdmi port put the hdmi cable in the xbox 360 and slot it in the hdmi port on your hdtv