answersLogoWhite

0


Best Answer

Many tub/shower valves are designed to be used either as a tub only or as a tub-shower combo. You will note that the valves have inlets on the sides for the hot & cold water supply, and outlets top and bottom for directing water either to the tub or diverted to the shower head. By plugging the bottom outlet with the appropriate plug and either soldering or wrapping the threads with Teflon tape, the valve directs the water to the shower head.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

11y ago

You can if the base shape is compatible. Usually they are not, as few tub faucets are 'deck mount' and few lav faucets are wall mount. Also most tub faucets are 8" centres and all lav faucets are 4". - However if it fits and you like it there's no reason not to.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Can you use a tub and shower faucet for a shower with no tub?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Can you use a tub and shower faucet for a tub with no shower?

yes


Is it possible to go from a three handle tub shower faucet to a two handle tub shower faucet?

Yes


What does a tub faucet do normally?

A tub faucet acts as a shower and can be used to bath in the bath tub. It is a pressure valve which makes the flow of water through it constant and gives a nice shower.


What is the difference between a shower and a tub?

The difference between a shower and a tub is the shower tends to enclosed with water that comes out of a shower head above while a tub has a faucet that pours into a large basin.


In a delta faucet why does the tub run when you are using the shower?

Defective divertor


What is a shower diverter?

It's the part of a tub control that makes the water go to either the faucet or the shower.


Why is there water coming out of the tub faucet but not from the shower head?

1- plugged shower head 2- defective diverter


What is the proper height for bathtub faucet?

The average is 16 inches, naturally there are some lower and some higher, according to requirements and design.


How can you stop water leaking through the shower head when both cold and hot water are on but you want the water coming in through the tub faucet and not through the shower head?

If the faucet contains the re-direction valve (closes off the water from the faucet and redirects the water to the shower head) you need to rotate the faucet counter clock wise to unscrew it from the plumbing and replace it with a new one. Take the old one to your local box store and they can match it up for you.


When water is diverted from tub faucet to shower faucet it leaks behind wall?

You have a leak between the diverter and showerhead or the arm for the showerhead is not sealed properly into the fitting in the wall


How do you determine where water is leaking through from the second floor showertub to the kitchen below?

You need to do a leak test on the tub and shower. To ch'k the drain fill tub about 1/2 full without running the tub faucet next plug shower head and tub spout turn water on this will ch'k faucet Next run water on shower doors this is where the majority of leaks are found water running out and down the corner of the unit If tiled also ch'k tile grout.


How much water is wasted if a faucet is left running for only three minutes?

It all depends what faucet is running if it is a kitchen or lavatory faucet it would be roughly 3 gallons if it was a tub and shower faucet it would roughly 15 gallons