Yes - you need a new drive shaft, new transmission bell housing and a few other items. Reference www.supras.com
yes u can. check out www.z1motorsports.com in Georgia
no mostly torbo two strokes have govoners
Yes it will bolt right up with no problems.
well the Y pipe entry diameter is 2 inch so it should be 2 inch?
head bolt location for 3.8 liter v6 ford eng. non-torbo did not payattion to lengith of bolt in proper location please help
some are, but like 99% are propelled by propellors on the top Actually all helicopters use a main rotor and a tail rotor for lift and stability. Most late model helicopters utilize a jet engine and transmission power train. Not unlike a torbo prop arrangement.
Volvo 940s do not have PVC valves. They do however have positive crankcase ventilation. Non torbo models have a flame trap that can clog, cause excessive crankcase pressure and blow out the oil seals. The flame trap should be checked every oil change. Change to the new plastic one if you still have the old brass finned one. It clogs faster. It is smaller than a golf ball. It mounts atop a 1/2 inch hose comming up from the oil box on the engine under the intake manifold between #3 & #4 cylinders. It has a small hose out the side and a "Ball Cap" hose on top.