Yes, acrylic lacquer can be applied over a 2 pack finish. Be aware, using a very fine finish could cause an adhesion problem.
No, the solvents in lacquer are to hot and volatile. The lacquer will cause bubbling of the acrylic paint.
No, the solvents in lacquer are to hot and volatile. The lacquer will cause bubbling of the acrylic paint.
If the Enamel is an original baked finish there should be no problem. Many DIY touch up paints are made from Acrylic Lacquer. If however the enamel is air-dried then the solvents in the lacquer will react and cause the enamel to bubble and craze. Enamel paints become hard on the surface but stay soft underneath if not baked to harden them. The lacquer is able to penetrate this outer layer and react with the enamel paint.
scrape off the lacquer paint first. by means of sand paper #100-140 before applying the latex paint
You can, but I don't advise it. There are a number of Good quality water based finishes for use over acrylic paint. Your local art supply or craft store will have a selection for you to choose from depending on your needs.
You must rough up the old finish, use sandpaper. Then apply the heat resistant paint
Yes, you can put chalk pastels over acrylic paint. After acrylic paint is dry, you can use soft pastels over the paint so it won't crack.
Be careful applying lacquer as a top coat over latex or water based paint. The paint will often "craze" (bubble or sag) when lacquer is applied to it.
Lacquer can cause the paint to bubble or crack due to the very hot solvent that is a part of lacquer. If you want a clear coat over paint, a better choice is spar varnish over oil base paint and arcylic urethane over latex.
Wood veneer can be painted over on kitchen cabinets. The paint should be a latex that is not of acrylic nature. Oil paint will only smear and not dry evenly.
yes
Lacquer thinner evaporates quicker. It is cleaner or leaves less of a film than paint thinner. Lacquer thinner will thin most solvent based paint but paint thinner shouldn't be used to thin Lacquer. Lacquer dries from the surface painted out and enammal dries from the surface of the paint down to the surface painted. Using the wrong thinner affects how the paint dries and may affect the final finish.