remove timing cover, on the left cam sprocket(closer to inside of vehicle) you will see the letter (I)for intake and a notch above it on the valve cover align those marks.Next on the right cam sprocket you will see the letter (E) for exhaust and a notch above it on the valve cover align those marks.Last you have a notch on your crank sprocket, align that notch with the arrow just above it.Align all marks then turn belt to revolutions and see if marks are stilled aligned if not try again until you get it right.If so put everything back together and "happy driving!"
How in the heck did you get a v6 engine in a sephia first of all!?!?!?!?
Go to this website: http://www.kiatechinfo.com/index.asp It's free. It has all the engine stuff there. You just need to give them an email address and make up a password.
The most likely place on any engine is a thin cover plate on the front of the engine which covers the timing gears
every system has its own marks and settings. You need to provide make model year engine to get a correct answer
On the front of the engine. Get a manual on your car from the parts store or internet.
how to set your gears for timing belt on 1999 kia sephia
how to set engine timing for mazda t3500
1998 and newer have no timing marks. Timing cannot be adjusted.
como encontrar las marcas de un sephia 1999
Yes, a crank sensor is one of the major sensors used to control engine timing and cylinder firing.
The timing belt on a 1999 Kia Sephia is changed by removing the timing cover, loosening the tensioner, and pulling the belt off. A new belt is then put in place and then tension reapplied.
The timing on a Saturn engine is fixed - you must line up the TDC marks when you change timing chains. Any variations in spark timing are controlled by the computer.