0
Both hot and cold water in tub faucet flows out in slow trickle?
Wiki User
∙ 16y ago
Your cartridges or cartridge must be bad or blocked with debris. Remove, clean and replace if necessary.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Can hot water bleed into the cold water line through a sing handle shower body?
Yes, it can also cross through a two handled faucet. Both the hot and cold sides of the faucet must be on and the flow of water must be stopped or greatly reduced on the outlet side of the faucet. This can occur when a hose with a spray nozzle is attached to a laundry tub faucet with the faucet on and the spray nozzle off, or when a shower faucet is on but the shower spray head is off. When another cold water outlet in the system is turned on then the pressure on the cold side of the laundry tub or shower faucet in question could be lowered below the pressure on the hot side and hot water can flow into the cold water side. There are faucets which have integral check valves which prevent this from occurring. WWW.WOODBRIDGEPLUMBING.COM
What is the best water filtration system for home?
Several water filtration systems are available for your home. It depends on whether you want a pitcher for your fridge or something to be mounted to your faucet. Pur and Brita are both popular brands.
How is electricity similar to water?
Electricity is similar to water in several ways. Both electricity and water can flow and be transferred from one place to another. They both have the ability to provide energy to power devices or perform work. Additionally, both can be controlled and harnessed for various purposes.
Why can't electricity flow through coin?
It can.Electricity, both static and current, flows through coins quite easily.
How to Choose the Right Water Filter for Your Home?
Many people feel that their local water supply tastes funny and contains too many additives. Bottled water is a popular alternative, but it can become very expensive very quickly. A home water filter may be the ideal solution for great tasting water that doesn’t break the bank. Consider Water Usage When you think about what kind of water filter to buy, consider how much water you use on average. If you don’t tend to use much water for drinking or for cooking, you may find that a pitcher with a built-in filter may be the right choice for you. If you use water from home more often, a filter that attaches to the sink faucet may work better for you. Faucet filters will clean all of the water that comes through the tap, so you always have fresh and clean water available for cooking, drinking, or any other purpose. What Level of Filtering do you Need There are different levels of filtering that clean different types of particles from your water. Typical pitcher and faucet water filters use charcoal to clean chemicals like chlorine and fluoride from the water. More powerful water filters can be installed next to or under the sink and filter the water directly from the pipe to the faucet. These filters provide the maximum amount of filtering for the water that flows through them. They are large enough to accommodate powerful filters that remove every imaginable unwanted particle from the water before it runs through the tap. Larger Systems Require Installation These heavy duty water filtration systems can be far more expensive than the smaller pitcher and faucet filters. The big units need to be installed by a plumbing professional so that you don’t experience any unwanted plumbing disasters. Since they are usually mounted into the cabinet beside the sink, a cabinet expert may need to be hired to make the necessary alterations. Purchasing and installing a large water filter is quite a commitment of both time and money. Once installed, though, the larger unit will keep your water cleaner and safer for you and your family to use for any purpose on a daily basis.
How can you stop water leaking through the shower head when both cold and hot water are on but you want the water coming in through the tub faucet and not through the shower head?
If the faucet contains the re-direction valve (closes off the water from the faucet and redirects the water to the shower head) you need to rotate the faucet counter clock wise to unscrew it from the plumbing and replace it with a new one. Take the old one to your local box store and they can match it up for you.
Why is there no water coming out of sink faucet in bathroom but tub faucet works?
The shut off valve under the sink, the faucet itself, or most likely, the screen in the end of the spout is plugged. If neither hot or cold is coming out, it is kind of unlikely both shut off valves and both sides of the faucet would go bad at the same time. The screen being clogged would stop any water from coming out. The screen just unscrews out of the spout.
The river usually flows down to?
The river usually flows either to or from a source body of water, which could be both fresh or salty.
Can hot water bleed into the cold water line through a sing handle shower body?
Yes, it can also cross through a two handled faucet. Both the hot and cold sides of the faucet must be on and the flow of water must be stopped or greatly reduced on the outlet side of the faucet. This can occur when a hose with a spray nozzle is attached to a laundry tub faucet with the faucet on and the spray nozzle off, or when a shower faucet is on but the shower spray head is off. When another cold water outlet in the system is turned on then the pressure on the cold side of the laundry tub or shower faucet in question could be lowered below the pressure on the hot side and hot water can flow into the cold water side. There are faucets which have integral check valves which prevent this from occurring. WWW.WOODBRIDGEPLUMBING.COM
How are straits and channels the same?
they both have water in themThey are both narrow openings in the earth, usually in the ice/snow environments, where water flows through
Can a single handled faucet with a hot and cold mix be used for a cold water faucet only?
Yes. If you can attach a y to your cold water line, split it and run cold into both cold and hot Hopkins on the faucet.Yes , by blocking off the supply to the H/W side of the faucet and only connecting the C/W UNLESS it is a temperature or pressure balance type.
How do you replace an old faucet?
You close the 2 shut off valves below the faucet, remove the pipes going to faucet from both ends. Now you will see the 2 large flat nuts holding the faucet to countertop. These will be easier to remove with a plumbers faucet wrench (about $8 in your hardware store) This has a long shaft and a flat spring loaded head. Remove both nuts and pull faucet out. When you go th get new faucet,also buy braided SS flexible water lines. About $4 each, they are much simpler and better than the cheap grey plastic ones. Re-connect everything opposite order.
Why is a faucet like a race horse?
They both run
How does an undershot water wheel work?
In an undershot water wheel, the wheel turns as a result of the weight of the water. The water flows into the wheel, stops and then when the wheel turns the water flows out underneath the wheel. It is used when you do not have a big head of water. In the overshot wheels the water pushes the wheel and then flows over the top of the wheel. The overshot wheel uses both the weight and the momentum of the water and so are more efficient and powerful.
How do you turn on the water to chase the cat on 24 Carrot Island?
Click on one or both of the faucet controls to turn on the shower. (red or blue tap)
How many minutes will 40 gallons of hot water last in a shower?
That depends on both how quickly water flows out of the shower head (gallons per minute) and how hot the water is (ratio of cold water to hot water). Also depends on the recovery rate of the water heater. As you use up the hot water, the water heater is making new hot water, but not usually as fast as you are using it. A high recovery rate will extend the time you have hot water.
Can you use two water supply ouy lets with faucet?
There are always two hoses connected to a faucet. Hot & cold will have their own valves & stainless lines. (1) to each side. It's an easy hook up. Just turn off both valves, connect new faucet the same way & turn them on again.
