54.6dB
That depends on both the input signal and the type of amplifier the transistor is used in.
amplifier will strengthen da small input signal n amplifies it
A voltage amplifier (high input and output impedances) with a gain of 83.5 dB will amplify a signal of 1 millivolt to an output of 15 volts.
The output of a common emitter stage is inverted, it is not out of phase.
altough voltage follower circuit provides output voltage which is in phase to input voltage as in noninverting amplifier but in unamplified form.
slew rate is the ability of an amplifier to reproduce amplified version of the input signal in terms of frequency and phase. The input signal amplitude change is fast. But the amplifier will take some time to give response to the changes in input signal. i.e. how fast the amplifier tracks the input signal is the slew rate. For an amplifier the slew rate should be high in order to avoid signal distortion. The rate of change of the output voltage of an amplifier for the given input signal change is called the slew rate.
That depends on both the input signal and the type of amplifier the transistor is used in.
Small signal amplifiers are generally referred to as "Voltage" amplifiers as they convert a small input voltage into a much larger output voltage.
Since we know that the amplifier gain is given by A=Output voltage/input voltage (where A is the amplifier gain) So, it can be written as output voltage=A*input voltage, so when the output part increases gain increases but when input part increases gain decreases
amplifier will strengthen da small input signal n amplifies it
Amplifiers are electronic device that responds to a small input signal (voltage, current, or power) and delivers a larger output signal.
Voltage gain is the ratio of the output voltage of an amplifier to its input voltage.
An amplifier is both an input and output device. An amplifier, as its name suggests, amplifies a signal, meaning that it makes it stronger. An amplifier takes something as input, like maybe a sound signal, and its output is a more powerful (or louder) version of the same signal.
It never referred as ratio but Rather a gain A in the form of output divided by the input and implies voltage A=gain. basically is input resistance divided by the feedback resistance
In Voltage Shunt Amplifier, the Output voltage is supplied in parallel with the Input voltage through the feedback network.
A voltage amplifier (high input and output impedances) with a gain of 83.5 dB will amplify a signal of 1 millivolt to an output of 15 volts.
The amplifier whose output is inphase with it input means if we consider voltage amplification then there is zero phase shift in input and output