There is more than one answer, but the most common is probably impedance.
You can change current by altering potential difference or resistance... But assuming the voltage is constant, the resistance of the circuit restricts the flow of electrical current.
A circuit must be closed in order for a current to flow because it helps keep a current flow pass. When the switch is closed on a circuit there is a constant flow. When the switches open the flow is disturbed around the circuit.
In a circuit, the purpose of a switch is to control the current flow to the load by opening the circuit (off) or closing the circuit (on). When the circuit is open, the is no complete loop through which the current can flow. When the switch closes the circuit, it restores the loop, and thus allows the current to flow.
A fuse does not control the flow in a circuit, it limits the current in a circuit. If the load in a circuit shorts out the fuse link melts and opens the circuit and stops the current flow and prevents the wires feeding the circuit from melting and catching fire. resist
If the circuit is closed the electric current will be closed as well.
Resistance is the property of a component which restricts the flow of electric current.
You can change current by altering potential difference or resistance... But assuming the voltage is constant, the resistance of the circuit restricts the flow of electrical current.
The circuits conductor serves as a pathway for current to flow.
transistor
A measurement of opposition to electric current flow in a component or circuit.
An inductive load can cause current to lag voltage in an AC circuit. An increase in resistance will decrease amount of current flow.
It restricts current flow
In electronics/electricity, it's a component or part of a circuit that opposes/reduces the flow of current.
The higher the resistance the lower the current flow. It restricts the flow of electrical current. The resistance will not depend upon the current. The current flow will depend on the resistance.
A circuit must be closed in order for a current to flow because it helps keep a current flow pass. When the switch is closed on a circuit there is a constant flow. When the switches open the flow is disturbed around the circuit.
It measures resistance in a component or circuit to determine if there is a break in that circuit or component. If there's no resistance, it means there's a break, as no electrical current is passing through.
a circuit breaker