answersLogoWhite

0


Best Answer

remove the large plastic shield under the steering wheel-something like 8 screws. The blinker is near the steering column.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: 1999 Mercury villager blinkers stopped working the fuse is fine What should you check next?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

Blinkers stopped working?

Replace the Turn Signal Flasher Relay.


02 Chevy Malibu Rear brake lights and blinkers stopped working?

Check the fuse


1998 Ford Contour blinkers have stopped working changed flasher still not working what is the next step?

check your fuses


98 mercury villager Rear fan not working?

There are several things that can cause your 1998 Mercury Villager rear fan to stop working. The most common cause is a disconnected or corroded ground wire.


Why would the blinkers not work when the hazard lights are working on a 1994 Mercury Villager LS?

Two different switches. The combination switch on the column is most likely the culprit. This may be fuses. The turn signals and hazard lights are fed by separate circuits.


Your brake lights and blinkers stopped working and it is not the fuse What else could be the problem?

Bulbs? Sockets? Steering column switch?


What is wrong with a 2001 Nissan Xterra if the blinkers stopped working and the flashers still work?

I believe the flashers are on a separate fuse than the blinkers, that is where I would first start to look, is the fuse box


2002 Mercury Grand Marquis fan stopped working?

2004 mercury grand marquis fan stop working


Why is Mercury Villager washer fluid not working?

The washer pump has probably failed or is plugged with dirt.


How do you fix a non-working speedometer-odometer in a 1997 mercury villager?

Replace the instrument cluster.


What causes the Blinkers to stopped working in a 2001 grand am?

There could be numerous problems that may cause this fault. Personally, my blinkers started going out (working sometimes and sometimes not) and what I found out is this...The flasher switch that is located in the dashboard above the radio is faulty. When my blinkers do not work i just tap down on the flasher switch without turning it on and my blinkers work again. Shotty electrical work in this car if ya ask me.


What effects blinkers and blower motor?

Could be a fuse issue if they have stopped working or a dynamo, alternator, generator issue ie, not putting out enough current.