You have a defective brake light switch that needs to be replaced. About $10 for the part in our neighborhood. It's a plug 'n play deal.
Brake light, on your 2000 Chrysler Concorde, by accessing it from the inside of the trunk. Take hold of the brake light, push in and turn. The brake light will come out.
The brake light switch is behind the brake pedal.
brake bleeding sequence for 1999 Chrysler is as follows: with engine off start with right rear 4 times then left rear same 4 times then right front 4 times then left front 4 times simple
In the top of the trunk near where the brake light is located, there is a small plastic window, remove it and you access the light bulb.
That warning light means a light bulb is out. Check all of your brake lights (including the brake light on the rear dash!)
try replaceing brake pads, or check the rotors for damage
i was wondering how to change rear brake drums for 1999 Chevy venture
Check the brake light switch.
A brake light on a 1999 VW can be accessed through the rear of the vehicle. Locate and remove the plastic covers for the light housings. Remove the bulbs. Replace with new units.
You must replace the brake pad sensors inside or on the rear calipers... usually that is the reason why a brake service is more expensive on a bmw. all due to sensors and the availability of those sensors
Has anyone had an experience with the rear wheels locking up due to the service bulletin issued by Chrysler, asking the dealer to replace rear brake cylinders + rear brake drums + rear brake shoes + brake springs etc... ????? Thanks mariobros
How do you replace the rear brake light bulb on a 2001 Honda civic?"