not in the state of new york
this is caused by ignition lock cylinder failure, you will have to replace the ignition lock cylinder and key.
ojpllkjl;
How I can replace ignition switch cylinder from Isuzu Rodeo?.
Unbolt and remove
You can replace the ignition lock cylinder in your 1994 Pontiac Firebird without removing the steering will. Remove the retaining ring at the top of the ignition cylinder. The ignition cylinder will slide out.
Adjust the belt or replace it with a new one.
== ==
This is a big job. I suggest getting a manual on your car from AUTOBOOKSONLINE.COM.
No, not if it is not defective. If the ignition switch is defective then that is all you need to replace.
how do you replace ignition switch on a 1992 Chevy cavalier 2.2 4 cylinder
Replace the ignition lock cylinder.
The 93 Acclaim has a serpentine belt. The tensioner below the alternator is what keeps the tension. If you have not tension I would replace the belt first and then check the tensioner.